Eco star Plus Glass
Product introduction:
Eco-Star Plus glass is produced by applying one or two layers of silver on the glass surface by Vacuum Sputtering method. Silver is a material with the lowest emissivity coefficient (Emissivity), which is a measure of energy radiance. Ordinary clear glass has a surface diffusion coefficient of 0.84
Which means 90% of the heat absorbed through the surface of the glass? When LOW-E coatings are applied to the glass, the surface diffusion rate is less than
It decreases by 0.1. Eco-Star Plus glass is a product with high light transmission capability, which at the same time greatly reduces the transmission of infrared rays and the absorption of heat from sunlight. This product is a great choice for hot weather as well as cold weather. Coatings on Eco-Star Plus glass reflect infrared energy, reducing heat absorbed or lost in the building by changing the direction of heat radiation. These glasses strike the best balance between visible light transmission and solar energy control. Compared to conventional reflex coatings, Eco-Star glass has the highest amount of visible light transmission. These products guarantee heat in winter and cold in summer while maintaining stable energy consumption. High-performance Eco star Plus coatings increase building efficiency by reducing energy consumption. In other words, investing today will lead to tomorrow’s return on investment.
Attributes:
- Heat control and high energy efficiency
- Reduce heating costs
- Do not interfere with the transparency of glass and the passage of natural daylight
- Maximum use of solar heat
- In case of tempering, increase 5 times the strength compared to ordinary glass
- In case of tempering Minimal injury when breaking glass due to splitting into fine and non-winning particles
Process considerations
Eco-Star Plus glass should be used as a double-walled glass, with the layered side of the glass facing into the space between the glass. Since this glass is produced by the soft coating method, special considerations must be taken when converting it to double glazing.
Maintenance
Eco star glass is packed in a box and vacuum and it is better to keep it in a dry place with proper ventilation to have a longer life. The glass must be processed during the specified period.
Transportation and cutting
- Avoid direct contact with the coated layer
- Use suitable protective gloves: Place the coated side up during cutting
- The coated surface should be cut in dry conditions or using oils Special for this process to be done.
Peeling the edges
The cover along the edges of the cup must be removed before producing double-glazed glass to ensure good adhesion of the spacers.
Wash
Use special machines with washable glass.
Applications
Commercial buildings (office, hotel, shopping center, airport, etc.), skylights such as greenhouses, where low reflection light is required, as well as residential buildings and all buildings in which the use of Tempered Glass. The use of Eco-Star Plus glass with colored glass, reflective glass or patterned glass leads to the creation of special designs by combining different colors and patterns while maintaining increased performance in order to control the sun’s energy.
Quality standards
High quality glass with CE certificate and 1096 EN (European standard)
Reviews
There are no reviews yet.