Eco Star Glass

Eco Star Glass

Product introduction:

Eco star glass is a colorless energy control glass (LOWE) that is produced by Soft Coating method. The metal oxide coating is deposited on the surface of the glass flute under vacuum conditions (Sputtering System). This coated layer reflects short and long infrared waves.

Attributes:

• Can be used on plain flute glasses
•  Dimensions: 2250 × 3210 mm
•  Thickness: 4 and 6 mm and in winter double-walled eco-star is up to three times more than ordinary double glazed heat insulation and this feature

It has many advantages: – Prevention of thermal energy loss – Environmental protection, due to reduced energy consumption – Prevention of evaporation of glass in cold seasons due to the close temperature of the inner surface of the glass At room temperature

• In summer, in addition to doubling the direct sun heat from two normal walls

Has other significant advantage: – Thermal comfort due to maintaining the desired temperature inside the building – Reducing maintenance costs and repairs of cooling facilities

– Reduce energy consumption to cool the environment

• The appearance of eco-star glass is the same as standard double glazing and in both passing and reflecting modes

Light has a similar function.

• In renovation projects, eco-star double glazing can be used in existing profiles.
• The multifaceted performance of Eco Star can be created by using other types of glass with it

Improve sound insulation, security, decoration and privacy. . According to the customer’s order, Eco star can be delivered as a laminate in custom dimensions.

Process Considerations Eco-Star glass should be used as double glazed, so that the layered side of the glass is inside the walls. Since this glass is produced by soft layering method, special considerations must be taken when converting it to double glazing.

Maintenance

Eco-Star glass packaging is in the form of boxes and vacuums and it is better to keep it in a dry place with proper ventilation to have a longer life. Glass processing must be done during the specified period.

Shipping and cutting

• Avoid direct contact with the coated layer
• Use appropriate protective gloves
• Place the coated side up during cutting
• Coated surface should be cut in dry conditions or using special cutting oils to do this process.

Peeling the edges

The cover along the edges of the cup must be removed before producing double-glazed glass to ensure good adhesion of the spacers.

Wash : Use special machines with washable glass.